See screenshot below for details.BMW USB to OBD K+DCan Switching Diagnostics Cable I have tried all 3 USB ports and have also tried restarting several times.

No cable detected and no ignition detected. I have tried with the cable by itself and with the cable plugged up to the OBD port. From what I remember last time I coded, this was all that was needed to set up the cable in Windows 10, but the cable is STILL not showing up. Now I was finally able to go to properties and change the COM port to COM1 and set latency to 1. After that, I finally had 'USB Serial Port' show up in the 'Ports (COM & LPT)' tree. Then a new type of USB device showed up in its own tree (can't remember the name) and I reinstalled the drivers again for this new device. After this, my cable showed up as 'USB to Serial converter' in the 'Universal Serial Bus controllers' tree. I went into properties for this device and manually installed the 64 bit drivers from the EDIABAS hardware folder in the C drive. Then I plugged in my cable and it showed up as 'KDCAN' USB device in device manager in its own 'tree'. I changed this one to COM4 in the properties menu. Then under the Ports 'tree' there is permanently a 'Communications Port' device (at least for me).

I did so by going to the 'Action' menu in device manager and selecting 'Add legacy hardware'.

In Windows 10 you have to manually add the 'Ports (COM & LPT)' device in device manager. The only thing that's changed is that it's a new laptop and I think previously I was using a USB 2.0 port, but this new laptop only has USB 3.0 ports. I installed the 64 bit drivers from EDIABAS and was successful, but when I plug in the cable, I'm still not getting cable detection or ignition detection in INPA. Yes it's the right cable, no it's not a cable with a switch to change modes. Well now I need to code something out again and I reinstalled everything and CANNOT remember how to get the cable to work again. Ok, so about 6 months ago I researched everything for how to code using BimmerGeeks standard tools 2.12 and was able to get a good handful of things coded and was on my merry way.

Inpa obd cable